|
|
|
National Stock Number:
5310-00-286-3403
Federal Supply Class:
5310
National Item Identification Number:
002863403
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 66711 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 66711 | 55284 | HONEYWELL INTERNATIONAL INC. | | 66711 | 6K4C8 | GOODRICH CORPORATION | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.516 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-721 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-726 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-671 GRADE 15 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | MINIMUM TENSILE STRENGTH | 72000 POUNDS PER SQUARE INCH | | OVERALL DIAMETER | 1.000 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.059 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
|
|