|
|
|
National Stock Number:
5310-00-285-9635
Federal Supply Class:
5310
National Item Identification Number:
002859635
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5310PL1236049 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 650207PC1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | RUBBER SYNTHETIC OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 417,GR SB815BE3 MIL STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.4375 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.625 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.109 INCHES MINIMUM AND | | 0.119 INCHES MAXIMUM | | HARDNESS RATING | 75.0 SHORE DUROMETER A MINIMUM AND | | 85.0 SHORE DUROMETER A MAXIMUM | | MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
|
|