|
|
|
National Stock Number:
5310-00-285-1622
Federal Supply Class:
5310
National Item Identification Number:
002851622
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 160106 | 57712 | TELEMECHANICS INC | | 160106 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | H226-532PT417 | 3B4M0 | LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS | | H226-532PT417 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | H226-532PT417 | 70408 | AT AND T CORP | | 160106 | 70408 | AT AND T CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | MATERIAL | IRON OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.875 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL C FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TY 2,CL C FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | | | THICKNESS | 0.062 INCHES NOMINAL |
|
|