|
|
|
National Stock Number:
5310-00-282-7558
Federal Supply Class:
5310
National Item Identification Number:
002827558
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1912235 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1912235 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1912235 | 24617 | GENERAL MOTORS CORP | | 1912235 | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | 1912235 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 1912235 | 7X677 | GENERAL MOTORS LLC | | 7F3536 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.250 INCHES NOMINAL | | MATERIAL | RUBBER SYNTHETIC OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.688 INCHES MINIMUM AND 1.692 INCHES MAXIMUM | | THICKNESS | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
|