|
|
|
National Stock Number:
5310-00-282-6116
Federal Supply Class:
5310
National Item Identification Number:
002826116
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10-54723 | 28839 | TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV | | 10-54723 | 59501 | UNISON INDUSTRIES LLC | | 118945 | 34623 | AM GENERAL LLC | | 608B1 | 56442 | DIAMOND REO TRUCK CO | | 914482 | 58275 | SASCO INC CANADIAN DIV | | 10-54723 | 77820 | AMPHENOL CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | C-F-206,TYPE 1,CL 16R1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | WOOL COMP 16R1X OVERALL | | MINIMUM TENSILE STRENGTH | 500 POUNDS PER SQUARE INCH | | OVERALL DIAMETER | 0.750 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.056 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
|
|