1560-00-281-5020 TIP,AIRCRAFT Index 1680-00-281-5023 LEVER,REMOTE CONTROL

National Stock Number:
5310-00-281-5021

Federal Supply Class:
5310

National Item Identification Number:
002815021

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
16A768695201NAPCO INTERNATIONAL LLC
190298816764GENERAL MOTORS CORP DELCO REMY DIV
19029881LW55BORGWARNER PDS (ANDERSON), L.L.C.
190298824617GENERAL MOTORS CORP
190298861928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
190298872582ROLLS-ROYCE SOLUTIONS AMERICA INC
190703616764GENERAL MOTORS CORP DELCO REMY DIV
22580319207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
522580319207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
19070361LW55BORGWARNER PDS (ANDERSON), L.L.C.
190703624617GENERAL MOTORS CORP
36191765282WHITE MOTOR CORP
19029887X677GENERAL MOTORS LLC
19070367X677GENERAL MOTORS LLC
83423116764GENERAL MOTORS CORP DELCO REMY DIV
8342311LW55BORGWARNER PDS (ANDERSON), L.L.C.
83423124617GENERAL MOTORS CORP
A06394758275SASCO INC CANADIAN DIV
83423176040MACK TRUCKS INC PARTS OPN
5310002815021A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5310002815021SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE


Techincal Specification:
MATERIALSTEEL COMP 1010 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTZINC OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.194 INCHES MINIMUM AND
0.198 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.428 INCHES MINIMUM AND
0.448 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.028 INCHES MINIMUM AND
0.034 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us