5310-00-274-7957, WASHER,FLAT

National Stock Number:
5310-00-274-7957

Federal Supply Class:
5310

National Item Identification Number:
002747957

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

417363PC2

10001

NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
DEPARTURE FROM CITED DESIGNATOR	AS MODIFIED BY OUTSIDE DIM.
HOLE DIAMETER	0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
OVERALL DIAMETER	0.8574 INCHES MINIMUM AND 0.8906 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 2 GRADE AND B CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THICKNESS	0.064 INCHES NOMINAL

Click here to Register for Free 30-day Trial