|
|
|
National Stock Number:
5310-00-271-7454
Federal Supply Class:
5310
National Item Identification Number:
002717454
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 12Z3000-5 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 4013125-5 | 07187 | HONEYWELL INTERNATIONAL INC. | | 422273PC8 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5486620-0033PC3 | 43689 | HUNTINGTON INGALLS INC | | 5310002717454 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310002717454 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7601911 | 19200 | US ARMY ARDEC RDECOM | | FF-W-84 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35338-119 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.334 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY A OVERALL | | MINIMUM TENSILE STRENGTH | 155000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
|