|
|
|
National Stock Number:
5310-00-264-2938
Federal Supply Class:
5310
National Item Identification Number:
002642938
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 325487PC4 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BOSS DIAMETER | 0.609 INCHES MINIMUM AND 0.625 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED | | BOSS THICKNESS | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-637 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-18411 CANCELED FED SPEC 4TH MATERIAL RESPONSE OR MIL-S-18411 CANCELED MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-1841 CANCELED MIL SPEC 6TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1211 OR STEEL COMP 1212 OR STEEL COMP 1213 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | NUT STYLE | SLEEVE | | NUT WIDTH ACROSS FLATS | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM | | NUT LENGTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
|
|