|
|
|
National Stock Number:
5310-00-262-4754
Federal Supply Class:
5310
National Item Identification Number:
002624754
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 118915 | 34623 | AM GENERAL LLC | | 1916643 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1916643 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1916643 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 1916643 | 24617 | GENERAL MOTORS CORP | | 1916643 | 7X677 | GENERAL MOTORS LLC | | 635B1 | 56442 | DIAMOND REO TRUCK CO | | KC8034 | 56442 | DIAMOND REO TRUCK CO | | 914570 | 58275 | SASCO INC CANADIAN DIV |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.692 INCHES MINIMUM AND 0.697 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | OVERALL DIAMETER | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | | | THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
|
|