|
|
|
National Stock Number:
5310-00-262-4487
Federal Supply Class:
5310
National Item Identification Number:
002624487
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1914844 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1914844 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1915150 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1915150 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1914844 | 24617 | GENERAL MOTORS CORP | | 1914844 | 7X677 | GENERAL MOTORS LLC | | 863994 | 12603 | CLARK EQUIPMENT CO | | 1915150 | 24617 | GENERAL MOTORS CORP | | 1915150 | 7X677 | GENERAL MOTORS LLC | | 5810E9008 | 83299 | HYSTER-YALE GROUP, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | DICHROMATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.626 INCHES MINIMUM AND | | 0.630 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.062 INCHES MINIMUM AND | | 1.065 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM |
|
|