|
|
|
National Stock Number:
5310-00-262-2914
Federal Supply Class:
5310
National Item Identification Number:
002622914
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5151487 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 5151487 | 24617 | GENERAL MOTORS CORP | | K 5151487 | 18954 | KORODY-COLYER CORP A CR INDUSTRIES CO | | 5151487 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5151487 | 7X677 | GENERAL MOTORS LLC | | 5310002622914 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | PC5151487 | C7432 | POWER COMPONENTS (DEUTSCHLAND) GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.384 INCHES MINIMUM AND | | 0.389 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.688 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.031 INCHES NOMINAL | | FEATURES PROVIDED | CASEHARDENED |
|
|