| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.344 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM NUT |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY REVISION 9 |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL | STEEL OVERALL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 0.281 INCHES MAXIMUM |
| NUT LENGTH | 0.948 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 0.047 INCHES MAXIMUM |
| PLATE WIDTH | 0.453 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 80205-NAS681 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| TEMP RATING | 450.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 32 |