|
|
|
National Stock Number:
5310-00-241-5084
Federal Supply Class:
5310
National Item Identification Number:
002415084
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 10192402 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 457-5569 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,CONDITION F4,COMPOSITION 4130 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.502 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.360 INCHES MINIMUM AND | | 1.370 INCHES MAXIMUM | | OVERALL HEIGHT | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | RECESS DIAMETER | 0.586 INCHES NOMINAL | | RECESS DEPTH | 0.035 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.250 INCHES NOMINAL | | RECESS ANGLE | 86.0 DEGREES MINIMUM AND | | 94.0 DEGREES MAXIMUM | | SPECIAL FEATURES | OD CHAMFERED ON RECESSED SURFACE | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18876 | | DESIGN CONTROL REFERENCE | 10192402 |
|
|