|
|
|
National Stock Number:
5310-00-219-7548
Federal Supply Class:
5310
National Item Identification Number:
002197548
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 806866D1 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1020 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI/SAE FED STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 1.5612 INCHES MINIMUM AND | | 1.5615 INCHES MAXIMUM | | OUTSIDE DIAMETER | 3.000 INCHES NOMINAL | | RECESS DEPTH | 0.052 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.312 INCHES MINIMUM AND | | 0.317 INCHES MAXIMUM | | TOP RECESS DIAMETER | 1.685 INCHES NOMINAL | | BOTTOM RECESS DIAMETER | 1.685 INCHES NOMINAL | | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0AHP5 | | DESIGN CONTROL REFERENCE | 806866D1 |
|
|