|
|
|
National Stock Number:
5310-00-209-2615
Federal Supply Class:
5310
National Item Identification Number:
002092615
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 1118-00 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS | | 6065 | 32770 | KATO ENGINEERING INC. | | 7H3937 | 11083 | CATERPILLAR INC | | 9003000 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | G205665-9 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | FFW00100TYPEBDESIGN1CLASS1 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | G205665-9 | 70408 | AT AND T CORP | | G205665-9 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | B TYPE AND 1 CLASS AND 1 DESIGN | | STYLE DESIGNATOR | FLAT EXTERNAL TEETH |
|