| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL COMP 1010 BASE |
| PLASTIC POLYAMIDE LOCKING INSERT |
| STEEL COMP 4130 NUT |
| ALUMINUM ALLOY 7075 SHELL |
| THREAD SERIES | UNF |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3B |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BASE |
| AISI ASSN STD SINGLE MATERIAL RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM BASE |
| CADMIUM NUT |
| OXIDE FILM SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE BASE |
| QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SHELL |
| NUT LENGTH | 1.421 INCHES MAXIMUM |
| NUT HEIGHT | 0.482 INCHES MAXIMUM |
| PLATE THICKNESS | 0.053 INCHES MINIMUM AND |
| 0.073 INCHES MAXIMUM |
| PLATE WIDTH | 0.719 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND |
| 0.135 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND |
| 0.567 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.123 INCHES MINIMUM AND |
| 1.127 INCHES MAXIMUM |
| TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
| FEATURES PROVIDED | FLOATING NUT |