|
|
|
National Stock Number:
5310-00-168-5086
Federal Supply Class:
5310
National Item Identification Number:
001685086
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 124D83 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 8740 OR | | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AAMS 6322 ASSN STD 1ST MATERIAL RESPONSE OR | | AMS 6382 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM NUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE NUT | | HARDNESS RATING | 19.0 ROCKWELL C MINIMUM AND | | 26.0 ROCKWELL C MAXIMUM | | NUT STYLE | SLEEVE | | FLANGE THICKNESS | 0.178 INCHES MINIMUM AND | | 0.198 INCHES MAXIMUM | | NUT DIAMETER | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | NUT LENGTH | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | FLANGE WIDTH ACROSS FLATS | 0.618 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION A | | HOLE TYPE AND QUANTITY | 6 DRILLED | | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND | | 92.0 DEGREES MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | ROUND NUT | | HEXAGONAL FLANGE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0AHP5 | | DESIGN CONTROL REFERENCE | 124D83 |
|
|