5310-00-167-0698 WASHER,FLAT Index 5310-00-167-0700 WASHER,FLAT

National Stock Number:
5310-00-167-0699

Federal Supply Class:
5310

National Item Identification Number:
001670699

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
004-003081-02126916NORTHROP GRUMMAN SYSTEMS CORPORATION
1361223-21D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
512-95N1LQK8KEYSIGHT TECHNOLOGIES, INC.
512-95N28480HEWLETT-PACKARD COMPANY
215100015457057NAVCOM DEFENSE ELECTRONICS, INC.
512-95N7ZXR5KEYSIGHT TECHNOLOGIES INC
817667718876U S ARMY AVIATION AND MISSILE COMMAND
NAS1149B632H80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1149BN632H80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FFW92TYPEAGRADE181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
AN960B688044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
5310PL07871169009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
NAS1149BN632HA0126LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE
AN961-6TD9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
S758897424AMETEK INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.139 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
OVERALL DIAMETER0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.026 INCHES MINIMUM AND 0.038 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us