5310-00-121-1103, WASHER,FLAT

National Stock Number:
5310-00-121-1103

Federal Supply Class:
5310

National Item Identification Number:
001211103

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

BACW10P45S	81205	THE BOEING COMPANY
BACW10P45S	Z03F0	BOEING DEFENCE AUSTRALIA LTD
BACW10P45S	Z8T75	BOEING DEFENCE AUSTRALIA LTD

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HEAT TREATMENT	ANNEALED OR COLD DRAWN 1/2 HARD CONDITION
HOLE DIAMETER	0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
OVERALL DIAMETER	1.000 INCHES MINIMUM AND 1.020 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7952 MIL SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 1020 OR STEEL COMP 1025 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	81205-BACW10P MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THICKNESS	0.125 INCHES NOMINAL

Click here to Register for Free 30-day Trial