|
|
|
National Stock Number:
5310-00-098-8014
Federal Supply Class:
5310
National Item Identification Number:
000988014
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 348204 | 98897 | LOCKHEED MARTIN CORP | | 5310PL0797920 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.000 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT | | ALUMINUM ALLOY 2024 NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | FM 10001,FSCM 24446 MFR REF 2ND MATERIAL RESPONSE LOCKING INSERT | | QQ-A-268 FED SPEC 1ST MATERIAL RESPONSE NUT | | NUT STYLE | SLEEVE | | FLANGE DIAMETER | 1.500 INCHES NOMINAL | | FLANGE THICKNESS | 0.060 INCHES NOMINAL | | NUT DIAMETER | 1.194 INCHES MINIMUM AND | | 1.200 INCHES MAXIMUM | | NUT LENGTH | 0.175 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.191 INCHES MINIMUM AND | | 0.198 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND NUT | | ROUND FLANGE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 348204 |
|
|