5310-00-082-1404, WASHER,FLAT

5935-00-082-1403 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5310-00-082-1404

Federal Supply Class:
5310

National Item Identification Number:
000821404

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

10116543	A486G	NIMIKKEISTOKESKUS NCB FINLAND
1018985-006	05037	ANACOMP, INC.
4197515-004	05869	RAYTHEON COMPANY
1018985-006	0HBH2	LEXEL IMAGING SYSTEMS INC
418171-6	96214	RAYTHEON COMPANY
5310000821404	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
812939	19203	PICATINNY ARSENAL
B4525-307-11	60532	TRANE U.S. INC.
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
5310PL0820164	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL1446635	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS15795&6	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27183-6	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
5953800	S0522	TADIRAN LTD

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
DEPARTURE FROM CITED DOCUMENT	AS MODIFIED BY THE FINISH
HOLE DIAMETER	0.151 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
OVERALL DIAMETER	0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND A CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THICKNESS	0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM

Click here to Register for Free 30-day Trial