|
|
|
National Stock Number:
5310-00-013-1204
Federal Supply Class:
5310
National Item Identification Number:
000131204
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 131204 | 24617 | GENERAL MOTORS CORP | | FFW84CLASSASTYLE1 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35337-30 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1561 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | ZINC AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS C FED SPEC 1ST TREATMENT RESPONSE OR | | QQ-Z-325 TYPE 2 CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND | | 53.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 0.573 INCHES MINIMUM AND | | 0.595 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.975 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.113 INCHES MINIMUM AND | | 0.123 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | 1 STYLE AND | | A CLASS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FFW84CLASSASTYLE1 | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS35337-30 |
|