5307-01-415-8717, STUD,WELDING

National Stock Number:
5307-01-415-8717

Federal Supply Class:
5307

National Item Identification Number:
014158717

Description:
STUD,WELDING

Detail:
A HEADED OR HEADLESS FASTENER EXTERNALLY OR INTERNALLY THREADED. IT IS INTENDED FOR FASTENING BY WELDING THE HEAD, UNTHREADED END OR WELDING TIP. IF HEADED, THE HEAD IS NOT DESIGNED TO BE SELF-HOLDING, NOR TO BE TURNED WITH A WRENCH OR INSERTED DRIVER, NOR DOES THE HEAD HAVE SMALL RAISED PROJECTIONS ON THE TOP OR UNDERSIDE TO FACILITATE WELDING. SEE ALSO BOLT, WELDING.

Manufacturer Information:

M24149/1-553 (MOD)	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-S-24149/1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-S-24149/1-553 MOD	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DEPARTURE FROM CITED DOCUMENT	AS MODIFIED BY THREAD LENGTH
FEATURES PROVIDED	HEAT SHIELD
LENGTH EXCLUDING FLUXED WELDING TIP	3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AISI 1008 THRU 1022 COND ANNEALED ASSN STD ALL MATERIAL RESPONSES
MATERIAL	STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022
NOMINAL THREAD SIZE	0.375 INCHES NUT THREAD
SPECIAL FEATURES	50,000 PSI. TENSILE STRENGTH
SHOULDER DIAMETER	0.620 INCHES MINIMUM AND 0.687 INCHES MAXIMUM
SHOULDER LENGTH	0.093 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
STYLE DESIGNATOR	WELDING
THREAD CLASS	2A NUT THREAD
THREAD DIRECTION	RIGHT-HAND NUT THREAD
THREAD LENGTH	0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
THREAD QUANTITY PER INCH	16 NUT THREAD
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC) NUT THREAD
UNTHREADED END DIAMETER	0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM
UNTHREADED END LENGTH	2.766 INCHES NOMINAL

Click here to Register for Free 30-day Trial