|
|
|
National Stock Number:
5307-01-410-6665
Federal Supply Class:
5307
National Item Identification Number:
014106665
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 1135E71FN29 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 522C074-461 | 055V9 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 522C074-461 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 5.490 INCHES MINIMUM AND 6.000 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A193 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL UNS K14072 | | NOMINAL THREAD SIZE | 1.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 1.375 INCHES STUD THREAD | | SPECIAL FEATURES | STUD THREAD UNDERCUT FOR RELIEF: 1.185 IN. DIA. X 0.310 IN. WIDE | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.750 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 2.620 INCHES NOMINAL NUT THREAD | | THREAD QUANTITY PER INCH | 8 STUD THREAD | | THREAD QUANTITY PER INCH | 8 NUT THREAD | | THREAD SERIES DESIGNATOR | UN NUT THREAD | | THREAD SERIES DESIGNATOR | UN STUD THREAD |
|
|