|
|
|
National Stock Number:
5307-01-409-1705
Federal Supply Class:
5307
National Item Identification Number:
014091705
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 522C074-211 | 055V9 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 522C074-211 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 3.690 INCHES MINIMUM AND 3.750 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A193 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL UNS K14072 | | NOMINAL THREAD SIZE | 0.750 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.750 INCHES STUD THREAD | | SPECIAL FEATURES | STUD THREAD UNDERCUT FOR RELIEF: 0.595 IN. DIA. X 0.250 IN. WIDE | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.380 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 1.120 INCHES NOMINAL STUD THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) NUT THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) STUD THREAD | | THREAD QUANTITY PER INCH | 10 NUT THREAD | | THREAD QUANTITY PER INCH | 10 STUD THREAD |
|