|
|
|
National Stock Number:
5307-01-362-4514
Federal Supply Class:
5307
National Item Identification Number:
013624514
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 12334C18 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 12334C18 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.250 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM FIRST HOLE | | OVERALL LENGTH | 5.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J429,GR 5 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 1.000 INCHES STUD THREAD | | NOMINAL THREAD SIZE | 1.000 INCHES NUT THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 2.500 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 1.500 INCHES NOMINAL STUD THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) NUT THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) STUD THREAD | | THREAD QUANTITY PER INCH | 8 STUD THREAD | | THREAD QUANTITY PER INCH | 8 NUT THREAD |
|
|