|
|
|
National Stock Number:
5307-01-303-3939
Federal Supply Class:
5307
National Item Identification Number:
013033939
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| MS51864-204-16 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS51864-204-16 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 302B OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 384 OR | | STEEL COMP 385 | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.875 INCHES MINIMUM AND | | 2.125 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3356 TO 0.3368 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.896 INCHES MINIMUM AND | | 1.000 INCHES MAXIMUM NUT THREAD | | 0.781 INCHES MINIMUM AND | | 1.000 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 140.0 BRINELL STANDARD MINIMUM |
|