|
|
|
National Stock Number:
5307-01-286-7935
Federal Supply Class:
5307
National Item Identification Number:
012867935
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 172876-1 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| OVERALL LENGTH | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | NOMINAL THREAD SIZE | 0.138 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.138 INCHES STUD THREAD | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD QUANTITY PER INCH | 32 STUD THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) NUT THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) STUD THREAD |
|
|