|
|
|
National Stock Number:
5307-01-206-7497
Federal Supply Class:
5307
National Item Identification Number:
012067497
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 179124 | 24617 | GENERAL MOTORS CORP | | 179124 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1005 OR | | STEEL COMP 1006 OR | | STEEL COMP 1008 OR | | STEEL COMP 1010 OR | | STEEL COMP 1011 OR | | STEEL COMP 1012 OR | | STEEL COMP 1013 OR | | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1021 OR | | STEEL COMP 1022 OR | | STEEL COMP 1023 OR | | STEEL COMP 1025 OR | | STEEL COMP 1026 OR | | STEEL COMP 1029 OR | | STEEL COMP 1030 OR | | STEEL COMP 1033 OR | | STEEL COMP 1034 OR | | STEEL COMP 1035 OR | | STEEL COMP 1037 OR | | STEEL COMP 1038 OR | | STEEL COMP 1039 OR | | STEEL COMP 1040 | | MATERIAL DOCUMENT AND CLASSIFICATION | GM 260-M,FSCM 24617 MFR REF ALL MATERIAL RESPONSES | | SURFACE TREATMENT | ZINC OVERALL | | OVERALL LENGTH | 1.532 INCHES MINIMUM AND | | 1.592 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.438 INCHES NUT THREAD | | 0.438 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 14 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD | | 0.580 INCHES MINIMUM AND | | 0.688 INCHES MAXIMUM STUD THREAD |
|
|