|
|
|
National Stock Number:
5307-01-116-9800
Federal Supply Class:
5307
National Item Identification Number:
011169800
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 000835010100 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 000835010100 | D8266 | MTU FRIEDRICHSHAFEN GMBH | | 000835010109 | 3B518 | DETROIT DIESEL CORPORATION | | 000835010109 | D8266 | MTU FRIEDRICHSHAFEN GMBH | | DIN835M10X55-8.8 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | M10X55D1N835-8.8 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| OVERALL LENGTH | 55.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL PROPERTY CLASS 8.8 | | NOMINAL THREAD SIZE | 10.0 MILLIMETERS STUD THREAD | | NOMINAL THREAD SIZE | 10.0 MILLIMETERS NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 20.0 MILLIMETERS NOMINAL STUD THREAD | | THREAD LENGTH | 26.0 MILLIMETERS NOMINAL NUT THREAD | | THREAD SERIES DESIGNATOR | M NUT THREAD | | THREAD SERIES DESIGNATOR | M STUD THREAD | | THREAD PITCH IN MILLIMETERS | 1.25 NUT THREAD | | THREAD PITCH IN MILLIMETERS | 1.25 STUD THREAD | | THREAD TOLERANCE CLASS | 6G INTERNAL NUT THREAD | | THREAD TOLERANCE CLASS | 6G INTERNAL STUD THREAD |
|