|
|
|
National Stock Number:
5307-01-048-6175
Federal Supply Class:
5307
National Item Identification Number:
010486175
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 209-040-112-9 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 OR | | STEEL COMP E4340 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,C4 MIL SPEC ALL MATERIAL RESPONSES | | OVERALL LENGTH | 2.540 INCHES MINIMUM AND | | 2.560 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 13 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.760 INCHES MINIMUM AND | | 0.860 INCHES MAXIMUM NUT THREAD | | 1.120 INCHES MINIMUM AND | | 1.270 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | 63.0 MICROINCHES SHANK | | 32.0 MICROINCHES STUD THD |
|
|