|
|
|
National Stock Number:
5307-01-038-1457
Federal Supply Class:
5307
National Item Identification Number:
010381457
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 48700 | 95201 | NAPCO INTERNATIONAL LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 3.000 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 13 STUD THREAD | | THREAD PITCH DIAMETERS | 0.4575 TO 0.4595 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.000 INCHES NOMINAL NUT THREAD | | 0.620 INCHES NOMINAL STUD THREAD | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 37.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 95201 | | DESIGN CONTROL REFERENCE | 48700 |
|