|
|
|
National Stock Number:
5307-01-034-3011
Federal Supply Class:
5307
National Item Identification Number:
010343011
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| B406864-3 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND D2 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 3.750 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.750 INCHES NUT THREAD | | 0.750 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 10 NUT THREAD | | 10 STUD THREAD | | THREAD PITCH DIAMETERS | 0.6906 TO 0.6950 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.375 INCHES NOMINAL NUT THREAD | | 1.125 INCHES NOMINAL STUD THREAD | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND | | 30.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80020 | | DESIGN CONTROL REFERENCE | B406864-3 |
|
|