|
|
|
National Stock Number:
5307-01-028-1738
Federal Supply Class:
5307
National Item Identification Number:
010281738
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 1215318-101 | 17772 | AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC | | 1215318-101 | 30205 | MERCER PRODUCTS & MANUFACTURING COMPANY | | 1215318-101 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP E4340 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.530 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 24 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.340 INCHES NOMINAL NUT THREAD | | 0.340 INCHES NOMINAL STUD THREAD | | SPECIAL FEATURES | ADDITIONAL COTTER PIN HOLE ON OTHER END 0.076 IN. MIN,0.086 IN. MAX DIA 0.120 IN. FROM END | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.120 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.076 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM FIRST HOLE | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 1215318-101 |
|
|