|
|
|
National Stock Number:
5307-01-019-2105
Federal Supply Class:
5307
National Item Identification Number:
010192105
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| R9W1531-134 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5637 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,FINISH 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 8.720 INCHES MINIMUM AND | | 8.750 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 5A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 13 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 2.000 INCHES MINIMUM NUT THREAD | | 1.000 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STRIP TYPE LOCKING ELEMENT IN NUT END THREADS |
|
|