|
|
|
National Stock Number:
5307-00-950-6063
Federal Supply Class:
5307
National Item Identification Number:
009506063
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| DD5282 | 81601 | NORFOLK NAVAL SHIPYARD |
|
Techincal Specification:
| MATERIAL | STEEL COMP 3140 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 7.688 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | 0.625 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | 11 STUD THREAD | | THREAD PITCH DIAMETERS | 0.5680 TO 0.5690 INCHES NUT THREAD | | 0.5860 TO 0.5885 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.000 INCHES NOMINAL NUT THREAD | | 1.125 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | COUNTERBORE 0.375 IN. DIA BY 0.062IN. DEEP AND 0.125 IN. BY 60.0 DEG CENTER BOTH ENDS | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM |
|
|