|
|
|
National Stock Number:
5307-00-929-6602
Federal Supply Class:
5307
National Item Identification Number:
009296602
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| AP118563 | 73808 | CONTINENTAL TIRE THE AMERICAS, LLC |
|
Techincal Specification:
| HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.938 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-107 FSCM 73808 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | STRAIGHT KNURL 0.125 IN. OF THREAD STUD END | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.438 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.641 INCHES MINIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD |
|
|