|
|
|
National Stock Number:
5307-00-923-1040
Federal Supply Class:
5307
National Item Identification Number:
009231040
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 65104-11055-101 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.201 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE | | OVERALL LENGTH | 4.750 INCHES NOMINAL | | NOMINAL THREAD SIZE | 0.438 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.438 INCHES STUD THREAD | | SPECIAL FEATURES | TWO COTTER PIN HOLES EACH END 90 DEGREES APART | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.700 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.700 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|