|
|
|
National Stock Number:
5307-00-914-2866
Federal Supply Class:
5307
National Item Identification Number:
009142866
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 412158P6 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL | | SURFACE TREATMENT | NICKEL AND | | CADMIUM OVERALL | | OVERALL LENGTH | 0.890 INCHES MINIMUM AND | | 0.910 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 24 STUD THREAD | | THREAD PITCH DIAMETERS | 0.1730 TO 0.1745 INCHES NUT THREAD | | 0.1730 TO 0.1745 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.630 INCHES MINIMUM NUT THREAD | | 0.380 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.100 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 412158P6 |
|
|