|
|
|
National Stock Number:
5307-00-913-5418
Federal Supply Class:
5307
National Item Identification Number:
009135418
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5000M97P89 | 07482 | GENERAL ELECTRIC COMPANY | | 5000M97P89 | 24446 | GENERAL ELECTRIC COMPANY | | 5307PL0854716 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| OVERALL LENGTH | 1.420 INCHES MINIMUM AND 1.440 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | B5017B FSCM 59650 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.3284 TO 0.3343 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|