|
|
|
National Stock Number:
5307-00-913-4024
Federal Supply Class:
5307
National Item Identification Number:
009134024
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 6533-3 | 05160 | MICHIGAN DYNAMICS INC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6320 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8740 OR STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.460 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.500 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.2278 TO 0.2293 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|
|