|
|
|
National Stock Number:
5307-00-913-4010
Federal Supply Class:
5307
National Item Identification Number:
009134010
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5000M97P102 | 07482 | GENERAL ELECTRIC COMPANY | | 5000M97P102 | 07842 | PENN SCIENTIFIC PRODUCTS COMPANY INC | | 5000M97P102 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| OVERALL LENGTH | 1.380 INCHES MINIMUM AND 2.202 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | BSOT14C FSCM 59650 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.2163 TO 0.2210 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|