|
|
|
National Stock Number:
5307-00-900-5570
Federal Supply Class:
5307
National Item Identification Number:
009005570
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2M1755 | 11083 | CATERPILLAR INC | | 3M496 | 11083 | CATERPILLAR INC | | 3M496 | U3363 | CATERPILLAR TRACTOR CO LTD |
|
Techincal Specification:
| OVERALL LENGTH | 2.800 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 1E121 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | CHAMFER STUD END 12 DEGREES 30 MINUTES BY 0.180 IN. | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 0.640 INCHES NOMINAL STUD THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) NUT THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) STUD THREAD |
|
|