|
|
|
National Stock Number:
5307-00-891-6101
Federal Supply Class:
5307
National Item Identification Number:
008916101
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 563324 | 02991 | THOMPSON AEROSPACE, LLC | | 563324 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 563324 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 563324 | 26795 | A B A INDUSTRIES INC | | 563324 | 55213 | AIRCRAFT COMPONENTS AND FASTENERS INC | | 563324 | 59593 | JET INDUSTRIES, INC. | | 563324 | 77445 | RTX CORPORATION | | 563324 | 82001 | PCX AEROSTRUCTURES, LLC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.490 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.770 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2218 TO 0.2233 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) STUD THREAD |
|
|