|
|
|
National Stock Number:
5307-00-886-3740
Federal Supply Class:
5307
National Item Identification Number:
008863740
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| R1365P032 | 24446 | GENERAL ELECTRIC COMPANY | | R1365P032 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| OVERALL LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5637 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | SPECIAL FEATURES | STUD END 1/4-20 LOCKING THREAD 60 PERCENT | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | SURFACE FINISH | 32.0 MICROINCHES STUD THD | | SURFACE FINISH | 63.0 MICROINCHES SHANK | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM AND 0.622 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.2103 TO 0.2150 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|
|