|
|
|
National Stock Number:
5307-00-882-5990
Federal Supply Class:
5307
National Item Identification Number:
008825990
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 6825525P0075 | 24617 | GENERAL MOTORS CORP | | 6825525P0075 | 63005 | ROLLS-ROYCE CORPORATION | | 6825525P0075 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.141 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 1.031 INCHES NOMINAL | | MATERIAL | STEEL COMP 1045 OR STEEL COMP 1018 | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 1A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.484 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.484 INCHES NOMINAL NUT THREAD | | THREAD PITCH DIAMETERS | +0.2950 TO 0.2965 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD |
|
|