|
|
|
National Stock Number:
5307-00-848-7280
Federal Supply Class:
5307
National Item Identification Number:
008487280
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 6825525P003 | 24617 | GENERAL MOTORS CORP | | 6825525P003 | 63005 | ROLLS-ROYCE CORPORATION | | 6825525P003 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| MATERIAL | STEEL | | OVERALL LENGTH | 1.031 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 24 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2905 TO 0.2920 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.484 INCHES MAXIMUM NUT THREAD | | 0.453 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.141 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 63005 | | DESIGN CONTROL REFERENCE | 6825525P003 |
|