|
|
|
National Stock Number:
5307-00-846-8942
Federal Supply Class:
5307
National Item Identification Number:
008468942
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| A406864-16 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| MATERIAL | STEEL COMP O6 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-570,CL S1 FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 6.500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UN NUT THREAD | | UN STUD THREAD | | NOMINAL THREAD SIZE | 1.250 INCHES NUT THREAD | | 1.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 8 NUT THREAD | | 8 STUD THREAD | | THREAD PITCH DIAMETERS | 1.1735 TO 1.1788 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 2.000 INCHES MINIMUM NUT THREAD | | 2.000 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND | | 30.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80020 | | DESIGN CONTROL REFERENCE | A406864-16 |
|
|