|
|
|
National Stock Number:
5307-00-843-2510
Federal Supply Class:
5307
National Item Identification Number:
008432510
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 399741P9 | 55213 | AIRCRAFT COMPONENTS AND FASTENERS INC | | 399741P9 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5625 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 2.615 INCHES MINIMUM AND | | 2.635 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2308 TO 0.2323 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD | | 0.688 INCHES MINIMUM STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.100 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 55213 | | DESIGN CONTROL REFERENCE | 399741P9 |
|
|